Bolt eye
Specify passage, body thickness and clearance to the selected bolt.
AI-generated engineering concept — not a production photograph. Final geometry is defined by your drawing.
ENGINEERING CONCEPT / cs-product-069
Banjo fitting body
An eye-style fitting-body concept with a threaded side connection: define the bolt passage, sealing faces and internal flow intersection together.
- Buyer application
- Fluid control & equipment
- Reference type
- AI-generated geometry concept
- Material & process
- Options to review against your drawing
- Dimensions & tolerances
- Defined by your approved drawing
AI-generated engineering concept for a custom component discussion. It is not a production photograph, delivery case or completed inspection record.
FROM FORM TO A MANUFACTURING BRIEF
Connect a side passage around a hollow bolt within the available assembly space.
An eye-style fitting-body concept with a threaded side connection: define the bolt passage, sealing faces and internal flow intersection together.
01
Define the bolt and sealing stack
Provide the hollow-bolt geometry, sealing elements and available installation envelope alongside the fitting-body drawing. Identify the eye diameter, body thickness and two annular faces that locate the seal stack. State the intended orientation of the side connection and the tool access available for the surrounding assembly. The drawing review should distinguish features that guide the bolt from those that form the sealing interface. This concept covers the metal body only, with no included bolt, washer, hose or approved pressure rating for a finished connection.
02
Make the internal passage inspectable
Show the side-port thread standard, engagement depth and the radial passage entering the eye cavity. Define the required edge condition at that intersection so deburring can be reviewed as part of the machining scope. Identify sealing-face finish and flatness requirements separately from the exterior cosmetic finish. If a cleaning standard or inspection of otherwise hidden edges is required, agree the method and evidence before sampling. Avoid treating a clear outside photograph as proof that the internal passage is free from residual burrs or contamination.
03
Validate the connection under defined conditions
Agree dimensional checks for the eye, thickness, sealing faces and threaded connection, plus the required internal-edge and cleanliness evidence. Any pressure, leakage or cycle test needs the actual bolt, seals, medium and installation procedure with stated acceptance limits. Record which party performs the complete-assembly test and whether it is included in the quotation. Protect the annular sealing faces and thread openings in packing. Keep the approved body drawing linked to the bolt and sealing-element revisions so a repeat purchase does not silently change the connection stack.
MATERIAL & PROCESS REVIEW
Select the material for the drawing and service
These are candidates to discuss, not an approved material specification. Confirm the grade, condition and final finish before quotation.
- Brass
- Review approved alloy against medium and material restrictions for the application.
- Stainless steel
- Review selected grade, finish and cleaning scope against service conditions and assembly components.
The illustration does not establish a material grade, tolerance, coating or tested performance. Confirm these in your drawing and acceptance plan.
BEFORE APPROVING A SAMPLE
Agree what the checks need to establish.
Seal faces
Define annular contact area, surface and face relationships.
Threaded side port
State standard, usable engagement and internal passage depth.
Intersection edges
Agree accessible inspection and burr-removal acceptance.
BEFORE YOU RELEASE THE DRAWING
A practical next step.
Use these guides to define the records and checks your component needs.
Custom Banjo Fittings: Review Cross-Holes, Wall Sections and Sealing Faces
Specify the complete banjo connection, then assess passage intersections, remaining wall, sealing interfaces and cleaning requirements before machining.
Passivation and Cleanliness: Four Acceptance Checks for Turned PartsSeparate passivation verification from particle cleanliness, cosmetic appearance and final dimensional acceptance on small stainless turned parts.
MAKE THE NEXT STEP SPECIFIC
Bring your part into the review.
Use this concept to explain your direction. Send the current drawing and the interfaces that determine how your component must work.
- Body, hollow-bolt and seal-stack drawings with installation envelope
- Approved material, thread standard, sealing-face and internal-edge requirements
- Quantities, cleaning evidence and separately defined assembly test conditions
CONNECT THE FORM TO THE PROCESS
Review the manufacturing route.
CONTINUE WITH SOURCE-LINKED REFERENCES
Explore related component forms.
Review the source and specifications shown on each reference page. Similar geometry does not establish this concept’s production or performance.
AI-assisted studio viewcs-product-007
Brass valve joint
A brass valve-joint form with a bored body and textured collar. Thread, sealing and interface requirements should be defined in your drawing.
Explore component
AI-assisted studio viewcs-product-024
Stainless steel angled connector
A stainless steel connector with an angled body and round mounting features. Identify the mating faces, bore and critical hole positions for your version.
Explore component
cs-product-042
Compact pneumatic fitting
A compact brass fitting with a threaded connection, hex section and through passage. Review the mating port, sealing arrangement and installation access against the actual pneumatic circuit.
Explore componentFROM EXAMPLE TO YOUR REQUIREMENT
Found something
close to your part?
Send your drawing
Use an example to explain your idea.
Your own drawing defines the final specification.
FROM COMPONENT TO PROJECT
Review the evidence. Define your part.
Start with the component geometry, then check what the drawing, sample and order records need to establish for your own part.
Send the current drawing with quantities and critical requirements. The review is the starting point for agreeing scope, quotation and sample approval.
Request a drawing review