AI-assisted studio viewcs-product-025
Stainless steel flange plate
A stainless steel flange plate with a central bore and repeated mounting holes. Start with the bolt pattern, mating diameter and mounting-face requirements.
Explore component
Studio image: AI-assisted presentation. Select an original photograph to review the source.
Flanges & covers / cs-product-024
Stainless Angled Connector Supplier | Drawing RFQ
Request a stainless angled connector against your drawing and mounting interface. The original product reference shows an angled body, stepped circular base and face openings; define the material grade, contact faces and sample records for your own component.
- Material shown
- Stainless steel
- Process reference
- Drawing-specific process review
- Manufacturing model
- Custom, made to drawing
- Dimensions & tolerances
- Defined by your approved drawing
Key geometry & review priorities
- Angled upper body
- Stepped circular base
- Central and surrounding face openings
Reference example, not a stocked standard part. Quote and feasibility require your specification.
Download review brief
THE PRODUCT CASE / YOUR BUYING DECISION
How must the angled face and its openings align relative to the circular mounting base?
An angled connector brings mounting and front-face interfaces into different planes. This stainless steel reference helps instrument designers define their relationship, align the face openings and preserve installation access within the surrounding equipment geometry.
Explore this product caseDrawing-led purchasing
Angled connector: define the relationship between interfaces
Describe the assembly interface
Provide a section or model showing how the angled body meets the adjacent component and how the circular base mounts. Identify the functional contact faces, installation direction and space for fasteners.
Mark which surfaces locate the component and which provide clearance. If a mating part is required for a fit check, include its identity and drawing revision in the request.
Dimension the angled face and base
Define the angle, base profile and relevant lengths from the drawing references. Dimension the central opening and surrounding face holes for the intended mating assembly.
Use controlled datums to express the required relationship between the mounting base and the angled face. State which features need a defined edge condition after machining.
Specify grade and delivered finish
The existing product reference identifies stainless steel. State the exact grade, material condition and any surface treatment in your drawing. Identify dimensions and contact surfaces that apply in the final delivered condition.
List the material or treatment documentation required for acceptance. Record any proposed alternative as a separate decision before sample release.
Agree the sample checks
Identify the base, face, bore and hole positions that require recorded measurement results. Agree the drawing reference, part support and method for the actual shape before the sample is made.
For an assembly trial, name the mating hardware, procedure, acceptance criteria and reviewer. Use the inspection requirements guide to make the request comparable.
Compare a defined quotation scope
Send suppliers the same drawing revision, stainless grade, finish, quantities and required records. Separate the machined connector from fasteners or assembly work unless they are explicitly included.
Keep the approved sample and subsequent changes with the repeat-order baseline. Review the flange seat and stepped shaft as related interface examples, then send your files through the drawing-led enquiry.
Purchasing and inspection worksheet
| RFQ item | Specify before quotation | Record with the order |
|---|---|---|
| Base | Mounting face, profile and attachment. | Datum and seating-face checks. |
| Angled face | Angle, mating surface and opening pattern. | Drawing references and measured results. |
| Bore | Central opening and mating component. | Feature ID and inspection method. |
| Material | Stainless grade, condition and finish. | Required material and finish documents. |
| Sample | Quantity, inspection and separate fit trial. | Sample identity and acceptance. |
| Repeat | Approved drawing and change notification. | Release baseline and records. |
Questions before requesting a machining quotation
What material is identified for this reference?
The existing product reference identifies stainless steel. Specify the exact grade, condition and finish for your own component.
What should accompany an angled connector RFQ?
Provide the drawing or model, mounting base, angled face, bore and hole pattern, with relevant mating interfaces and quantities.
How should the angled face be referenced?
Identify the locating base and express the required face relationship using the drawing references and limits selected for the assembly.
Can a fit trial be requested?
Name the mating hardware, assembly procedure, acceptance criteria and reviewer, and list the trial in the quotation scope.
Which sample records should be agreed?
Identify the base, face, bore and hole features requiring results, together with drawing revision and agreed measurement method.
How are quantities and timing confirmed?
Include sample and production quantities and your target date; the quotation confirms the reviewed scope and schedule.
BEFORE YOU RELEASE THE DRAWING
A practical next step.
Use these guides to define the records and checks your component needs.
THE FEATURES TO LOOK AT
A closer look
at this component.
A stainless steel connector with an angled body and round mounting features. Identify the mating faces, bore and critical hole positions for your version.
Original Chengshuo product reference01
Angled upper body
02
Stepped circular base
03
Central and surrounding face openings
DEFINE YOUR PART
What needs to
be in your drawing?
Use the released drawing to identify the angled face, mounting base, central bore and hole pattern, material condition and feature-level records requested with the order.
- Mounting face and hole-pattern datums
- Sealing, flatness and surface requirements
- Fastener clearance and assembly access
- Drawing number, revision, units and material grade.
- Surface treatment, sample quantity and repeat-order needs.
01 / REVIEW
Resolve the requirements.
Share your drawing and the features that affect function. Agree material, process scope, inspection and commercial conditions.
02 / SAMPLE
Define what approval means.
Agree the sample quantity and measurements or assembly checks required for acceptance. Record the drawing revision used.
03 / REPEAT
Control the next order.
Retain the approved specification and packaging requirements. Review design, material or finish changes before repeat production.
Related geometries.
Explore flanges & coversAI-assisted studio view
AI-assisted studio viewcs-product-015
Aluminum flange seat
An aluminum flange seat with a central bore and a patterned mounting face. Define the face datum and the location of holes and slots from that reference.
Explore component
AI-assisted studio viewcs-product-035
Aluminum flange coupling
A flanged coupling with a central bore, radial mounting holes and an extended end section. Define the shaft interface and flange datum before agreeing assembly checks.
Explore componentFROM EXAMPLE TO YOUR REQUIREMENT
Found something
close to your part?
Send your drawing
Use an example to explain your idea.
Your own drawing defines the final specification.
FROM COMPONENT TO PROJECT
Review the evidence. Define your part.
Start with the component geometry, then check what the drawing, sample and order records need to establish for your own part.
Send the current drawing with quantities and critical requirements. The review is the starting point for agreeing scope, quotation and sample approval.
Request a drawing review