AI-assisted studio viewcs-product-031
Sensor base sleeve
A stainless steel sleeve with a long tubular body and stepped end features. Review the sensor envelope, mounting interface and required sealing details for your design.
Explore component
Chengshuo store product visual — drawing-based reference
Bushings & rings / cs-product-048
Brass solder-cup socket contact
A female contact reference for industrial circular connectors. Review the mating bore and solder-cup termination together so the contact fits both the mating pin and the intended wire.
- Material shown
- Brass
- Process reference
- Swiss CNC turning, dual-end boring and edge finishing
- Manufacturing model
- Custom, made to drawing
- Dimensions & tolerances
- Defined by your approved drawing
Key geometry & review priorities
- Front mating bore
- Rear solder-cup termination
- Thin-wall socket geometry
Reference example, not a stocked standard part. Quote and feasibility require your specification.
Download review brief
Drawing priorities
Mating bore and wire termination, reviewed together
A solder-cup socket connects two different interfaces: the mating pin at the front and the prepared wire at the rear. Review both ends before the contact geometry is released for manufacture.
- Define the mating-pin range, usable socket bore and insertion depth. Identify which surfaces require dimensional verification after finishing.
- Provide the wire size, cup depth and access needed for your soldering process. Specify the base alloy, plating system and any masked surfaces on the drawing.
- Agree the burr-control and cleanliness requirements for the socket and cup. Contact resistance, insertion force and solder-joint performance require validation against the completed connector design.
BEFORE YOU RELEASE THE DRAWING
A practical next step.
Use these guides to define the records and checks your component needs.
CNC Machining RFQ Checklist: Drawings, Materials and Acceptance
Build a clear quotation package: identify the current part definition, separate open decisions, specify the delivered condition and agree what acceptance records must cover.
Material Certificates and Lot Traceability for Machined PartsSpecify the evidence linking a material certificate to incoming stock, the machining job and the finished lot, while keeping chemistry checks separate from performance claims.
Cross-Hole Deburring of Turned Parts: Define Internal Edge AcceptanceSpecify hidden intersections, permitted edge changes and verification access so a turned fitting or contact component has an inspectable deburring requirement.
Electrical Contact Pins: A Drawing Review ChecklistSeparate mating geometry, material, plating and electrical validation when preparing a custom contact pin or conductive pillar for quotation.
THE FEATURES TO LOOK AT
A closer look
at this component.
A female contact reference for industrial circular connectors. Review the mating bore and solder-cup termination together so the contact fits both the mating pin and the intended wire.
Chengshuo Alibaba product listing01
Front mating bore
02
Rear solder-cup termination
03
Thin-wall socket geometry
DEFINE YOUR PART
What needs to
be in your drawing?
Reference images explain geometry. Your approved drawing and agreed inspection records establish dimensions, material and acceptance requirements.
- Bore, outside diameter and fit
- Wall section and distortion-sensitive areas
- Finish, edge condition and inspection access
- Drawing number, revision, units and material grade.
- Surface treatment, sample quantity and repeat-order needs.
01 / REVIEW
Resolve the requirements.
Share your drawing and the features that affect function. Agree material, process scope, inspection and commercial conditions.
02 / SAMPLE
Define what approval means.
Agree the sample quantity and measurements or assembly checks required for acceptance. Record the drawing revision used.
03 / REPEAT
Control the next order.
Retain the approved specification and packaging requirements. Review design, material or finish changes before repeat production.
Questions before
your drawing review.
Can you change the dimensions or material?
This is a custom component example. Submit your required geometry and exact material grade for feasibility review; the reference image is not a fixed catalogue specification.
What quantity and lead time should I plan for?
Include both sample and production quantities plus your target date. The quotation confirms the agreed scope, price and schedule after review.
Can I send confidential drawings?
If your project needs an NDA, contact Alen before uploading confidential files. Website submission itself does not create a confidentiality agreement.
Related geometries.
Explore bushings & ringsAI-assisted studio view
AI-assisted studio viewcs-product-028
Shaft positioning collar
Compact collars with a central bore and radial fixing features. Define the shaft diameter, axial location and fastening method before specifying your version.
Explore component
AI-assisted studio viewcs-product-023
Stainless steel tube components
Stainless steel tube forms with open bores. Define the wall thickness, length and hole placement to review a similar component.
Explore componentFROM EXAMPLE TO YOUR REQUIREMENT
Found something
close to your part?
Send your drawing
Use an example to explain your idea.
Your own drawing defines the final specification.
FROM COMPONENT TO PROJECT
Review the evidence. Define your part.
Start with the component geometry, then check what the drawing, sample and order records need to establish for your own part.
Send the current drawing with quantities and critical requirements. The review is the starting point for agreeing scope, quotation and sample approval.
Request a drawing review