Studio image: AI-assisted presentation. Select an original photograph to review the source.
Bushings & rings / PRODUCT CASE
Shaft collar drawing: bore, axial stop and radial fixing
Use this photographed shaft-collar reference to define the bore-to-shaft relationship, axial stop face and radial fixing in your own drawing. State the material, hardware scope and installed access before requesting a quotation. Agree dimensional checks separately from any assembly retention trial.
How does the collar locate on the shaft, and which face establishes the axial stop?
02 / READ THE GEOMETRY
Details that shape the requirement.
01
Central through-bore
Specify the shaft diameter and required bore relationship. Include entry edges and clarify whether the collar slides into position before it is secured.
02
Radial fixing feature
Define the fixing-hole geometry and mating fastener. Show access in the installed assembly and specify any limits on contact marks at the shaft interface.
03
Axial stop face
Identify the face that locates the adjacent component. Define its position and geometric relationship to the bore, together with any required contact condition.
FROM GEOMETRY TO THE WORKSHOP
See the manufacturing context.
Explore a Chengshuo workshop scene alongside the features in this product study. This is general process footage, not footage of the reference part or its inspection results.
Chengshuo footage8 sec
Machining and a dimensional check
Machining close-ups followed by a dial-caliper check.
Make the stopping and fastening functions explicit. Include shaft-contact restrictions and adjustment needs before selecting the collar and screw details.
Provide a shaft-and-collar assembly view showing the intended position and access. State whether the collar will be repositioned and identify the surfaces involved in that operation.
02Resolve material and mating details
Specify the collar material and finish, shaft condition and fixing hardware. Review the completed interface rather than assuming the photographed collar defines those choices.
03Agree component and retention checks
Select bore, face and fixing-feature measurements for samples. Where axial retention needs evaluation, define the load case, installation procedure and test responsibility separately.
04 / BEFORE SAMPLE APPROVAL
Agree what acceptance will show.
Verify bore dimensions and the specified relationship to the stop face.
Check radial fixing features against the hardware requirement.
Record any separately specified retention trial with its installation conditions.
Product reference & scope
This case uses a photographed Chengshuo component to explain the drawing, purchasing and inspection decisions for a similar part. Project specifications and acceptance are agreed during review.
Turn the reference collar into a comparable request
Shaft and bore
Supply the mating shaft requirement, bore limits and entry condition. Explain whether adjustment is needed before fixing and which shaft surfaces must remain protected.
Stop face and fixing
Identify the axial locating face, its relationship to the bore, radial fixing geometry and installed tool access. State which hardware is included in the requested supply.
Component and assembly evidence
Agree the sample measurements for the collar. Keep a requested retention trial separate, with the assembly procedure, loading, acceptance criteria and responsible party identified.
Use the original photographs to discuss geometry. The material remains drawing-defined; neither the AI-assisted studio view nor the general workshop clip establishes a finish, holding force or test result for this collar.
Questions before your drawing review
Is the photographed collar a standard stocked specification?
No. It is a Chengshuo reference component used to discuss a similar drawing. Specify the material, shaft fit, fastener and required retention performance in your drawing package.
What defines the collar-to-shaft relationship?
Provide the mating shaft dimensions and condition, the required bore relationship and whether the collar must slide or be repositioned before fixing. Identify permissible contact marks and assembly access.
Is radial fixing hardware automatically included?
Do not assume that it is. Identify the fastener interface and state whether hardware is part of the requested supply. Confirm installation access and any contact restrictions on the shaft.
Does dimensional inspection prove axial holding performance?
No. Bore, stop-face and fixing-feature checks concern the component drawing. Any retention trial needs separately agreed loading, installation conditions, acceptance criteria and responsibility.
Does the workshop clip show this collar being inspected?
No. The clip provides general Chengshuo machining and dimensional-check context. It is not footage of this reference collar or evidence of its inspection results.
Prepare a drawing-led enquiry
Your privacy, your choice.
Essential features work without tracking. Optional analytics help us understand visits and enquiries. Read our privacy notice.
