AI-assisted studio viewcs-product-017
Aluminum positioning block
An aluminum positioning block with pockets, holes and a shaped exterior. Relate the locating features to the functional datums in your drawing.
Explore component
Studio image: AI-assisted presentation. Select an original photograph to review the source.
Milled components / cs-product-029
Fiber Optic Grinding Fixture Supplier | Drawing RFQ
Request a fiber optic grinding fixture against your workpiece drawing, machine mounting interface and sample plan. This stainless steel reference shows fixture forms with repeated holding positions; agree the grade, dimensions and inspection scope for your own tooling.
- Material shown
- Stainless steel
- Process reference
- Drawing-specific process review
- Manufacturing model
- Custom, made to drawing
- Dimensions & tolerances
- Defined by your approved drawing
Key geometry & review priorities
- Repeated perimeter holding positions
- Central mounting features
- Two fixture forms in the source gallery
Reference example, not a stocked standard part. Quote and feasibility require your specification.
Download review brief
THE PRODUCT CASE / YOUR BUYING DECISION
How should every holding position locate the workpiece relative to the machine interface?
A fixture with repeated holding positions needs a consistent definition across the full pattern. Use this stainless steel fiber-optic grinding-fixture reference to specify the workpiece interfaces, central mounting features and inspection records for your own tooling requirement.
Explore this product caseDrawing-led purchasing
Grinding fixture: agree the complete supply scope
Define what each holding position locates
Provide the workpiece drawing and identify the features that contact each holding position. Show the insertion direction, contact surfaces and permitted clearance in an assembly section. State whether the workpiece or a separate insert is supplied for a requested fit check.
Use the same drawing references for repeated locations and identify any positions with different requirements. Name the workpiece version and the features that must remain accessible during loading and removal.
Describe the machine mounting interface
Identify the central mounting features, seating face and machine-side locating references on your fixture drawing. State the usable space, installation direction and any fasteners or mating components that are part of the request.
Show which locating references control the relation between the mounting interface and the workpiece positions. Where access for a tool or clamp matters, supply the relevant envelope and assembly sequence.
Specify the repeated pattern and checks
Provide the number, location and geometry of the holding positions on the controlled drawing. Define the reference system and the features that need recorded measurement results. Agree the inspection method, part support and report format for the actual geometry before ordering.
Do not replace a drawing requirement with a general claim of precision. If a workpiece seating trial is required, name the sample workpieces, procedure and reviewer. Use the inspection requirements guide to describe the deliverables.
State material and delivered condition
The existing photographed reference identifies stainless steel. Specify the required grade and condition for your own fixture and any treatment, finish or edge requirements. Mark dimensions that apply in the final delivered state.
List material and treatment records if they are required for acceptance. Agree cleaning, separation and packing requirements for contact surfaces where those conditions matter to installation.
Make sample and repeat-order scope comparable
Send suppliers the same fixture and workpiece revisions, mounting interface, requested quantity and inspection scope. Identify any separately supplied workpieces, inserts, fasteners or assembly activities. Ask for proposed alternatives and exclusions in the quotation.
Keep the sample decision and released files together for a repeat order. Review the related positioning block and guide pillar as interface references, then send the actual drawings through the machining enquiry.
Grinding fixture RFQ worksheet
| RFQ item | Specify before quotation | Record with the order |
|---|---|---|
| Workpiece | Drawing, locating surfaces, insertion and clearance. | Workpiece revision and agreed fit-check scope. |
| Holding pattern | Number, locations, geometry and drawing references. | Characteristic IDs and agreed measurement records. |
| Machine mounting | Central locating features, seating face and fasteners. | Machine interface and installation references. |
| Material | Stainless grade, condition and any treatment. | Required material or treatment documents. |
| Sample | Quantity, measurement method and separately defined trial. | Sample identity, results and approval decision. |
| Repeat order | Released drawing, packing and change notification. | Accepted baseline and agreed deviations. |
Questions before requesting a machining quotation
What material is shown in this fixture reference?
The existing product reference identifies stainless steel. Specify your required grade, condition and any treatment on the fixture drawing.
What should I send with a grinding fixture enquiry?
Provide the fixture and workpiece drawings, holding-position pattern, machine mounting interface, material, quantities and the checks required for acceptance.
How should repeated holding positions be specified?
Define the number, geometry, locations and common drawing references. Identify any positions with different requirements and list the features needing recorded measurements.
Can a workpiece fit trial be requested?
Identify the actual workpiece version and supplied samples, installation procedure, acceptance requirements and responsible reviewer. List the trial separately in the quotation scope.
Which inspection records are useful?
Agree the characteristic identifiers, drawing references, measurement methods and sample identity for the mounting interface and nominated workpiece locations.
How are sample quantity and timing agreed?
Include the sample and production quantities plus your target date in the RFQ. The quotation confirms the reviewed scope, requested records and schedule for that order.
THE FEATURES TO LOOK AT
A closer look
at this component.
Stainless steel grinding-fixture forms with repeated holding positions. Discuss the workpiece interfaces, locating scheme and inspection approach for a comparable fixture.
Original Chengshuo product reference01
Repeated perimeter holding positions
02
Central mounting features
03
Two fixture forms in the source gallery
DEFINE YOUR PART
What needs to
be in your drawing?
Use the released drawing to identify the workpiece positions, machine mounting, material condition and feature-level records requested with the order.
- Pocket geometry and internal corner radii
- Hole positions and functional datums
- Clamping surfaces, edge breaks and finish
- Drawing number, revision, units and material grade.
- Surface treatment, sample quantity and repeat-order needs.
01 / REVIEW
Resolve the requirements.
Share your drawing and the features that affect function. Agree material, process scope, inspection and commercial conditions.
02 / SAMPLE
Define what approval means.
Agree the sample quantity and measurements or assembly checks required for acceptance. Record the drawing revision used.
03 / REPEAT
Control the next order.
Retain the approved specification and packaging requirements. Review design, material or finish changes before repeat production.
Related geometries.
Explore milled componentsAI-assisted studio view
AI-assisted studio viewcs-product-018
Aluminum fixing plate
An aluminum fixing plate with an angled form and a central mounting opening. Define the relationship between the mounting faces and the hole centre.
Explore component
AI-assisted studio viewcs-product-034
Aluminum ball screw supports
Support forms from Chengshuo’s ball screw support series. Define the locating bore, mounting face and fastening pattern together; bearing arrangement and assembly acceptance need your specification.
Explore componentFROM EXAMPLE TO YOUR REQUIREMENT
Found something
close to your part?
Send your drawing
Use an example to explain your idea.
Your own drawing defines the final specification.
FROM COMPONENT TO PROJECT
Review the evidence. Define your part.
Start with the component geometry, then check what the drawing, sample and order records need to establish for your own part.
Send the current drawing with quantities and critical requirements. The review is the starting point for agreeing scope, quotation and sample approval.
Request a drawing review