AI-assisted studio viewcs-product-031
Sensor base sleeve
A stainless steel sleeve with a long tubular body and stepped end features. Review the sensor envelope, mounting interface and required sealing details for your design.
Explore component
Huantong store product visual — drawing-based reference
Bushings & rings / cs-product-040
Linear-motion guide bushing
A bored guide sleeve for linear-motion modules and automation fixtures. Define the shaft clearance, housing fit and guide length as an assembly, then agree the material and surface requirements.
- Material shown
- Confirmed during drawing review
- Process reference
- Swiss-type turning, boring and face finishing
- Manufacturing model
- Custom, made to drawing
- Dimensions & tolerances
- Defined by your approved drawing
Key geometry & review priorities
- Through bore
- Cylindrical locating surface
- Chamfered entry edges
Reference example, not a stocked standard part. Quote and feasibility require your specification.
Download review brief
Drawing priorities
Shaft clearance and housing fit
A bored guide sleeve for linear-motion modules and automation fixtures. Define the shaft clearance, housing fit and guide length as an assembly, then agree the material and surface requirements.
- Provide shaft and housing limits so the two fits can be reviewed together.
- Identify the guide length, entry edges and reference faces.
- Confirm the actual material, lubrication and wear requirements; the listing does not establish a material grade or service life.
BEFORE YOU RELEASE THE DRAWING
A practical next step.
Use these guides to define the records and checks your component needs.
Shaft and Bushing Fits: What to Specify on the Drawing
Define shaft clearance, bushing retention and inspection condition separately, then connect size limits, geometric controls and sample checks to the assembly.
A Useful Inspection Record for Small Turned PartsBuild a report that connects each shaft, sleeve or pin measurement to the drawing revision, sample identity and agreed inspection method.
A Revision Checklist Before Reordering Machined PartsCompare the new order with the approved sample baseline, resolve changed requirements and record which revision each production lot must follow.
THE FEATURES TO LOOK AT
A closer look
at this component.
A bored guide sleeve for linear-motion modules and automation fixtures. Define the shaft clearance, housing fit and guide length as an assembly, then agree the material and surface requirements.
Huantong Alibaba product listing01
Through bore
02
Cylindrical locating surface
03
Chamfered entry edges
DEFINE YOUR PART
What needs to
be in your drawing?
Reference images explain geometry. Your approved drawing and agreed inspection records establish dimensions, material and acceptance requirements.
- Bore, outside diameter and fit
- Wall section and distortion-sensitive areas
- Finish, edge condition and inspection access
- Drawing number, revision, units and material grade.
- Surface treatment, sample quantity and repeat-order needs.
01 / REVIEW
Resolve the requirements.
Share your drawing and the features that affect function. Agree material, process scope, inspection and commercial conditions.
02 / SAMPLE
Define what approval means.
Agree the sample quantity and measurements or assembly checks required for acceptance. Record the drawing revision used.
03 / REPEAT
Control the next order.
Retain the approved specification and packaging requirements. Review design, material or finish changes before repeat production.
Questions before
your drawing review.
Can you change the dimensions or material?
This is a custom component example. Submit your required geometry and exact material grade for feasibility review; the reference image is not a fixed catalogue specification.
What quantity and lead time should I plan for?
Include both sample and production quantities plus your target date. The quotation confirms the agreed scope, price and schedule after review.
Can I send confidential drawings?
If your project needs an NDA, contact Alen before uploading confidential files. Website submission itself does not create a confidentiality agreement.
Related geometries.
Explore bushings & ringsAI-assisted studio view
AI-assisted studio viewcs-product-028
Shaft positioning collar
Compact collars with a central bore and radial fixing features. Define the shaft diameter, axial location and fastening method before specifying your version.
Explore component
AI-assisted studio viewcs-product-023
Stainless steel tube components
Stainless steel tube forms with open bores. Define the wall thickness, length and hole placement to review a similar component.
Explore componentFROM EXAMPLE TO YOUR REQUIREMENT
Found something
close to your part?
Send your drawing
Use an example to explain your idea.
Your own drawing defines the final specification.
FROM COMPONENT TO PROJECT
Review the evidence. Define your part.
Start with the component geometry, then check what the drawing, sample and order records need to establish for your own part.
Send the current drawing with quantities and critical requirements. The review is the starting point for agreeing scope, quotation and sample approval.
Request a drawing review